YUASA Batterie YTX14-BS (150x87x145)

Original initial battery incl. Acid pack.

SHIDO Litium Ion Batterie LTX14-BS (150x87x145),

Lithium Ion acid and liquid free, installation position freely selectable, 50% more lift capacity, at least 2000+ starting cycles, 65% lighter than identical batteries, only 6 min charging time !!!!, Capacity Control indicator.

High quality alternative for the original voltage regulator,

Perfect fit and easy to assemble, equipped with

1. Plug (3 yellow cables) for connection to an alternator
2. Cable + (red) and - (black) for the charging voltage directly on the battery.

The replacement voltage regulator, a 100% German product, can be connected directly to the alternator connector, but compared to the original regulator, the battery is fed directly with the regulated voltage.

The round mating connector of the original wiring harness where the voltage regulator is originally connected remains unused and should be stripped.

The advantage of this chosen measure with regard to the differentiated cabling is to bypass the possibly damaged cables of the original wiring harness, behind the round plug, and to lead the regulated voltage directly to the battery.

Regular checking of the connector to the alternator is important for the longevity of the regulator. This should always ensure 100% contact between the yellow lines.

To be sure that the system works properly, the voltage on the battery can be measured.

At idle with around 6000 rpm. If the voltage of approx. 14.5 V is not exceeded.
 
 

Fuel tap kit with reserve indicator light AT RD07 / A

3 reasons why this measure is easy on nerves, fuel pumps and your wallet:

1. With this measure, it is no longer necessary to constantly look for the fuel tap while driving as our system excludes switching to reserve as the tap is either open or closed.
2. The light that is installed in the original control lamp unit takes over the reserve message.
3. Another advantage is the saving of the electric fuel pump which normally pumps itself to "death" during the switchover process to reserve because it does not receive any fuel and thus burns out faster!

DANGER:

NOT SUITABLE FOR E10 FUEL!

Center Stand XRV 750 AT / 93 - 04

• Stable steel construction with comparable low weight (2,6 Kg).
• Easy jack-up due to the leverage and the rounded-down supporting areas.Easy mounting !!
• Lever can be purchased separately if desired.

SKF Wheel bearings KIT incl. lock-rings (rear)

Wheel bearings Kit consisting of high quality double-sided closed ball-bearings that have lock-rings with dust lips.

Bearing Kit incl. Simmering f.rear shock absorber.

Wheel bearings Kit consisting of high quality double-sided closed ball-bearings that have lock-rings with dust lips.

SKF Wheel bearing KIT incl. lock-rings (front)

Wheel bearings Kit consisting of high quality double-sided closed ball-bearings that have lock-rings with dust lips.

Rear fender kit "Enduro" RED LED

the assembly of our rear fender visually enhances the AT, especially the Enduro Optick in the rear area, as the fender sets the rear higher. The fender itself reaches the height of orig. Luggage rack.

Thus, if a luggage rack is still desired, this KIT can only be equipped with our steel-aluminum bridge.

KIT consisting of:

• GFK rear fender.
• Tail extension with TÜV (with RED LED taillight)
• Recording for mini turn signals & reflektor available.
• Turn signals are not included in the KIT

PS: Fits also with the original rear side covers